The Fresh Loaf

A Community of Amateur Bakers and Artisan Bread Enthusiasts.

Recent Blog Entries

grepstar's picture
grepstar

After a full 3x feeding of Francesca Fiore (my hydrated sourdough starter) for a day of baking last weekend, I found myself with an extra blob of her that I didn't want to just throw out. Flipping through Nancy Silverton's Breads from the La Brea Bakery, I saw the English Muffins recipe and was reminded of Sunday mornings when I was kid, waking up early with my Dad and munching on Thomas' English Muffins slathered with butter and strawberry jam. I decided to give them a shot.

I'll start with her recipe:

SPONGE:
18 oz White Starter
2 cups milk
8 oz unbleached white bread flour
3.5 oz dark rye flour

DOUGH:
Sponge
10 oz warm water (85 degrees)
0.9 oz fresh yeast
1/4 cup wheat bran
1/4 cup wheat germ
1/4 cup flax seeds
1/4 cup rye chops
1/4 cup raw sunflower seeds
8 oz unbleached white bread flour
1/4 cup barley malt syrup
1/4 cup vegetable oil
1 tbs sea salt
Rice flour for dusting
2 tbs unsalted butter, melted
Semolina flour for dusting

Here are the ingredients that I used based on what I had on hand.

SPONGE:
18 oz White Starter
2 cups plain soy milk
8 oz unbleached white bread flour (high extraction - 14% protein)
3.5 oz dark rye flour

DOUGH:
Sponge
10 oz warm water (85 degrees)
0.3 oz of SAF instant yeast
1/4 cup oat bran
3 tbs wheat gluten
1/4 cup flax seeds
1/4 cup coarse rye flour
1/4 cup raw sunflower seeds
8 oz unbleached white bread flour (high extraction - 14% protein)
1/4 cup (minus a smidge) agave nectar
1/4 cup vegetable oil
1 3/4 tbs kosher salt
Cake flour for dusting
Semolina flour for dusting

I made the sponge on a Sunday, but did not have the time to actually make them that night so I put it immediately into the fridge to ferment overnight. The next day, I removed it and it was nice and bubbly with a good odor.

I assembled the dough, let it ferment at room temperature for about an hour before I realized I wouldn't have time to bake that evening either. Into the fridge it went and the next day I set out to bake it. I let it come back to room temperature and then put in on a cutting board dusted with cake flour to rest, dusting the top with semolina flour for good measure.

 



At this point, the recipe calls for 15 muffin rings to be buttered and placed on a parchment-lined baking sheet, muffin rings are not in my baking arsenal (butter is). Instead of emptying out cans of tuna on both ends and washing them (as Silverton suggests), I opt for the less fishy route and construct my own rings out of parchment paper.


Paper rings


I thought this was pretty smart, since I didn't have to waste the butter to coat them. Once the muffins were done, I could just peel off the paper and enjoy the deliciousness of fresh English muffins. I placed the rings on baking sheets dusted generously with semolina flour and then filled with the dough. Here's where my paper rings idea started to collapse--literally.

Collapsing rings

Although they were having trouble containing the dough, they did a good job of maintaining the basic muffin shape and I was happy with that.

I wish I had captured the moment when one of my cats jumped on the pan of resting muffins landing a foot in at least two of them and then proceeding to track dough across the entire kitchen. Luckily, I caught him before he hit the rugs.

After an hour of rest, I dusted the muffins with semolina flour and put them into a preheated 400 degree oven and baked for 20 minutes. I then removed the pans, rotating them and flipping the muffins over. I was a bit discouraged at the look of the muffins after the first 20 minutes; they were turning out like giant biscuits. But sally forth, home baker!

After another 20 minutes of baking, I pulled them out of the oven set them out to cool. They were definitely looking more like English muffins and less like biscuits. About an hour later, I removed the parchment paper rings and laid them out for a photo shoot.



Time to pull apart and taste!

I'm a bit ashamed here. I couldn't even wait to take the picture before biting into one. They were/are pretty tasty little devils, but almost nothing like a Thomas' muffin. To my palate, much better tasting. The texture of the crumb was a little gummy, however, and I'm guessing it was because I used a bit too much rye flour in the dough and perhaps because of the extra time I gave the dough to ferment. If I had known I wasn't going to bake them the day I made the dough, I would have left out most if not all of the instant yeast. My substitution of the wheat gluten for the wheat bran was a mistake as well. In hindsight, I should have used some oats or millet. The agave nectar imparts an interesting sweetness to the muffins, but I could have cut it down to 2.5 tbs for a better flavor. The texture with the seeds is great. I'm definitely going to try these again with some small changes.

gothicgirl's picture
gothicgirl

I tend to dive head first into projects that are of interest to me.  At the moment, and it should come as no surprise to anyone, my obsession is bread.

Now, we are not talking about the homogeneous loafs of bland white sandwich bread that line the shelves at the super-mega mart.  What we are talking about is the hand crafted, rustic loafs of bread with distinct flavor, crustiness and unique texture. 

I had some minor success with cibatta bread (tasty, but the crumb was too tight and can be improved with a longer final proof ... see below), and I also made two tasty baguettes that were far superior to anything I could buy despite not having quite the texture I would have liked.  There were a little dry, and I need a better recipe I think.   

As you can see below, the crumb on the ciabatta is pretty tight.  That is because I put it into the oven with out a good long final proof.  My husband, who is a real doll most of the time, was tired and wanted to go to bed.  It was either bake the bread after only an hour of proofing, or listen to my darling whine. 

The bread lost.  It was still really tasy, however and had a good crunchy crust.  Gotta love that steam!

And here is my French Baguette that I made for Sunday dinner.

And ... turnovers that I made for dessert.  They had an apple filling, and I glazed them with flat icing when they were cool.  I used blitz puff pastry and I am thinking of doing a little photo demo of the process.  It is really very easy and far superior in flavor to frozen puff. Yeah, it may  not get as much puff, but for a turnover or a Napoleon it is just fine.

mountaindog's picture
mountaindog

 Hole-y-ness:

I've been asked how I get the big holes, and how I fold. Whether you are working with a bread dough that uses commercial yeast, or with sourdough, the same principles seem to apply from what I've experienced. Obviously, there are others here more experienced in sourdough who may have different techniques. It depends on what works for you.

What gives me the big holes is to use a very wet, soft dough, fold it 2-3 times for the first 60-90 minutes of fermenting to strengthen the gluten, and when you're ready to shape, VERY GENTLY pour it out onto your counter, VERY GENTLY fold the sides into the center to gather it up into a boule without degassing it in the least, flip upside down in your hand and tighten it into a boule by pinching the seam underneath closed. Then place it smooth-side down (seam-side up) into a floured banneton or proofing basket. Do not skimp on the rising time - if it needs 5 or 6 hours rather than the 3 stated in the recipe, let it rise all the way, and make sure your starter is very active.

I really like this bread, I just made it again this past weekend and it came out equally well as it did in the photo at top. It had more of a sour bite to it this time from the wet rye starter.

Thom Leonard’s Country French Bread (from "Artisan Baking" by Maggie Glezer)

Makes one 4 lb. (1.8 kilo) loaf

Time: about 18 hrs. with 30 minutes of active work

 

The evening before baking make the Levain as follows:

45 g ( 1 oz) fermented rye sourdough starter refreshed 8-12 hrs before (I use a batter-like starter made with equal weights water to rye flour, not a firm starter. If you only have a white flour starter, use that and just substitute 30 g of the white flour in the final dough with rye flour)

120 g (3.3 oz) lukewarm water

140 g (5.3 oz) unbleached all-purpose or bread flour (see my note below on flour)

Dissolve starter in the water in a small bowl, then add flour and beat this batter-like dough until very smooth. Place in covered container and ferment at room temp (@70F) until doubled, 8-12 hrs.

NOTE: I use only King Arthur All-Purpose flour rather than bread flour as it has a high enough protein content and a high ash content compared to other all-purpose flour. The high amount of protein found in most “bread flours” makes the crumb too tough for my taste.

Next day make the final dough as follows:

100 g (3.5 oz) Whole Wheat Flour (if you like your bread a little darker add up to 350 g whole wheat here and use 250 g less white flour below)

1030 g (36 oz) unbleached all-purpose flour (King Arthur has best protein and ash content. If using a white flour starter in the levain rather than rye, substitute 30 g of the white flour here with 30 g rye flour)

660 g (24 oz) warm water

all the fermented levain you made the night before (305 g or 10.6 oz)

23 g (0.8 oz) sea salt (preferably grey Celtic sea salt if you can find it, often sold in health food stores)

Mix By hand: combine all flours in large bowl. Add the warm water to the fermented levain to loosen it from container. Pour the watered levain into the flours and mix with spoon, dough whisk, or hands until just combined. Cover with plastic wrap and let rest (autolyse) for 20-30 minutes. Turn dough out onto work surface, knead for 10 minutes, then add salt, and knead for another 5 minutes until salt has dissolved and dough is very smooth and shiny.

Mix By stand mixer: same as by hand except leave in mixer bowl after autolyse, then mix with dough hook on lowest speed for 5 minutes. Add salt and knead in mixer at low speed for another 4-5 minutes until very smooth and almost cleans the bottom of the mixing bowl.

The dough should feel soft, sticky, and extensible at end of kneading. If it is too stiff and dry, add a few more drops of water until dough just barely clears bottom of mixing bowl at end of kneading if using a stand mixer, or until dough feels soft and stretchy, and slightly sticky, if hand kneading. Softer, wetter doughs give you larger air holes in the baked loaf, which also gives the bread more flavor.

Fermenting: Place dough in lightly-oiled bowl at least 3 times its size and cover with plastic wrap. Let ferment for 3 hours at room temp (@70F) until well-expanded but not yet doubled in bulk. Turn dough 3 times at 30 minute intervals by gently folding like a business letter and flipping upside-down, (that is, turn once at 30, 60, and 90 minutes into fermenting time), then leave the dough undisturbed for remainder of time. OR: for even more flavor, ferment at room temperature for one hour (turning 2 times, once at after 30 and once after 60 minutes), then retard overnight in fridge, warming up again next day at room temp. for 2-3 hours before shaping.

 

Rounding and resting: Turn dough out onto floured work surface, and very gently round it into a tight boule. Cover with plastic and let rest for 10-15 min. to relax the gluten. While resting, prepare your basket or banneton by dusting with flour. If you’d rather make 2 smaller boules than one large one, divide the dough in half with a dough cutter, and gently form each piece into a tight boule.

Shaping and proofing: Shape the dough into an even and tight round loaf (or leaves if making 2 smaller boules) without deflating it. Place dough topside down into the floured basket or banneton. Lightly sprinkle the top of the dough with flour, cover with plastic wrap and proof for 4 to 4.5 hours at room temperature (@70F) until at least doubled in volume and a slight dent remains when pressed with finger.

Preheating oven: At least 45 minutes before dough is fully-proofed, preheat oven with baking stone on middle rack to 500F.

Bake: Gently flip the dough upside down to release it from the banneton/basket onto semolina-dusted parchment on an over-turned baking sheet or wooden peel, or directly onto a semolina-dusted peel if not using parchment. Slash the boule with a razor in a pound sign (#) design, or in a spiral, cross, or any other desired pattern, as long as the slashes go completely across the top to allow for even expansion during baking. Slide parchment onto hot baking stone in oven, or onto semolina dusted baking stone if not using parchment, and quickly mist side walls of oven with water in a mister (do not spray near the oven light!) and quickly shut the oven door to prevent heat and steam from escaping. The steam helps the dough rise very quickly in the hot oven (called “oven spring”) and also makes the crust more brown and crisp. Turn oven down from 500F to 400F and set oven timer for 30 minutes (20 minutes if making 2 smaller boules). Continue misting every 30 seconds just 3 or 4 times for first 2 or 3 minutes of baking, then leave to bake. When first 30 minutes are up, open oven and rotate loaves around to even out browning. Set timer for another 30 minutes (20 minutes for 2 smaller boules) and check the loaf when that time is up. If it is still a light color brown, leave in for another 5-10 minutes until it is a deeper brown but not burnt, then probe center of loaf with instant-read thermometer, loaves are done when thermometer reads at least 205F in center. If they are getting burnt but center is not done, your oven is too hot, turn it down another 25 degrees or so next time. Let cool thoroughly on rack before cutting as the centers are still cooking, at least 2 hours.

breadnerd's picture
breadnerd

This weekend I was very happy to find Harvest King Flour at my local grocery. I used Harvest King in my baking classes, and convinced my boss to use it at the bakery I helped start up. I liked its creamy color, and that it was formulated for longer, cooler rises and artisan breads. I'm hoping to find the retail variety similar in quality--so far, so good.

 

Since Mountaindog has inspired me to look at the Artisan Baking book (I think I'll just start calling it ABAA!), I re-read the ciabatta recipe and found it different than most. Like the Essential Columbia recipe, it has a little wheat and rye flour, and uses a firm pre-ferment (this time a biga). I've been using a wet poolish (or my sourdough levain).

 

I was pretty good at following the ciabatta formula, though I did use a little more yeast as it's cold here and things have been moving slowly in my house. Of interest, the recipe calls for dissolving 1/4 teaspoon of yeast in a cup of water, and then using only a teaspoon of that liquid! I felt it was safe to use an entire tablespoon of the yeast-water--and my biga did perform pretty much as described (just about tripled in size in 24 hours at cool room temperature). Actually it could have been more developed, it was risen but not very light or airy once I pulled it apart. The dough in the formula is described as "gloopy" and they're not kidding. I thought I had my ciabatta dough wet enough in the past, but this was extreme--nearly batter. There's no way I could have benched this as I normally do, so I left it in the bowl for several "turns" (which were in fact more like stirring with a spatula). After a few turns it was starting to develop into dough--much like the NYT no knead bread in texture. The last turn I could do on a floured bench, and I returned it to the bowl for another hour or so of rising. I divided it into four loaves (instead of 2 per the recipe) and made an error in my final proofing--I forgot to put the seam-side down. So, my final loaves were baked 2 seam down, and 2 seam up to compare. In any case I was very happy with the results:

 

 

I forgot to take a "crumb shot" but the texture was much better--larger holes, but not too large or out of control. We had roast beef sandwiches for dinner which were literally to die for :) I do like the flavor I get from using the levain, so I might try that next time, with the new techniques learned on this batch!

 

Also on the hearth this day was a batch of Vermont Sourdough (as I have BREAD checked out from the library):

 

 

Apparently trying to video yourself scoring loaves causes some performance problems! I'm going to try to compile a video of slashing and find a way to post the edited version---Anyway, this loaf has some nice ears but the round loaf behind it has a definite "blow-out" that I've conveniently hidden from view!

Wayne's picture
Wayne

 With floydm's assistance, I think I finally figured out how to post pictures.  Hope this one posts ok.  This recipe is courtesy of "Artisan Breads" featuring Kossar's Onion Bialy's.  Thanks Floyd for your help.

beanfromex's picture
beanfromex

Last week I continued the experiments I have been doing since I learned about this method of bread baking.

I doubled the original recipe and followed the rest of the instructions but for using cornmeal instead of wheat bran ( I had none ).

I was even happier with this loaf. Doubling the recipe will be the norm for me from now on. I might even try tripling it.

I also kept the oven temperature as high as possible, probably about 500F. The crust was deep golden brown tinged with dark brown bits and looked great.

The four women to whom I served this bread have since asked me to teach them to do it. They also devoured the entire loaf, this kind of bread not easily being available here in southern mexico.

For ease, I cannot imagine improving on this method and recipe.

Now that we are going into a warmer season, my bread will be in the fridge, as my kitchen is now about 80F.  

now, if only I can get my ciabatta to work as well......

 Hasta luego.

JMonkey's picture
JMonkey

Many, many months ago, when I first started making sourdough, I tried making sourdough waffles with some leftover starter.

Man, was I disappointed. The flavor was nice, but the recipe said to expect some cool chemistry, and I saw none. What's more, these waffles were heavy and tough. Chewy. I like a crispy waffle with a tender, airy interior. Though the taste was good, these definitely did not fit the bill.

Then, last night, after I'd set up the final build for today's weekly sourdough bake, I had a revelation. I was making a no-knead version of white flour sourdough (odd for me, as those of you who know me know that I'm a health-nut hippie crunchy whole-wheat kind of guy. But every so often, I get a white bread craving, and, besides, we had company coming over. So what the hell?), and I had some starter left over. I hate throwing the stuff away. Glancing over at the unkneaded dough that would essentially knead itself while I slept, it suddenly hit me.

"Duh. You were using AP and whole wheat BREAD flour in the sponge for the waffles. No wonder it was tough. The stuff kneaded itself into bread dough!"

Doh.

So I went to the freezer, where I had a bag of leftover soft white whole wheat flour (i.e. whole wheat pastry flour -- I grind my own, but Bob's Red Mill sells an excellent whole wheat pastry flour. Their regular whole wheat bread flour? Not so much.) I figured I had enough starter and flour for a half batch of the recipe I'd used before, which made six waffles. Plenty for my wife, my 3-year-old daughter and me. So using the sourdough waffle recipe from the King Arthur Flour Baker's Companion as a guide, I whipped up a whole wheat version.

What a difference pastry flour makes. These were the lightest, crispiest, tastiest waffles I'd ever had. And, they were 100% whole wheat. I promise, if you make them with whole wheat pastry flour, especially WHITE whole wheat pastry flour, no one's going to know the difference:

Ingredients:
OVERNIGHT SPONGE -

  • 6 ounces or about 1 1/4 cups whole wheat pastry flour
  • 1 Tbs sweetener (honey, agave syrup, sugar, maple sugar, whatever)
  • 9 ounces or 1 cup and 2 Tbs butttermilk
  • 2 ounces or 1/4 cup of active sourdough starter, preferably whole wheat, but not required. Should be the wet kind (i.e. 100% hydration.)

    BATTER
  • 1 large egg
  • 2 Tbs (1/4 stick) unsalted butter, melted
  • 3/8 tsp salt
  • 1/2 tsp baking soda

    Mix up the sponge the night before. Cover it and let it sit. The next morning, it should be very bubbly. In another bowl, beat the egg with the melted butter until light, and then mix in the salt and baking soda. Dump this mixture into the sponge -- if the sponge is acidic enough, it should jump when it hits the alkaline baking soda. Mix it all together and then spoon it into a hot waffle iron. You'll know your waffle iron better than mine, but it usually takes about 2-3 minutes. I judge by the volume of steam -- when it starts to dissapate, they're usually done.

    This recipe makes six traditional waffles. If you've got a Belgian waffle maker, I'm afraid you'll have to find out for yourself how many it will make, but no matter. The recipe stands well to doubling, even quadrupeling, and leftover waffles freeze beautifully, so don't worry about making too many. When you want one for breakfast, just pop it direclty into the toaster from the freezer. Delicious.

    If you want to use up more starter than I did, simply double the amount of starter and only add 1 cup (8 ounces) of buttermilk and 5 ounces (1 cup + 1 Tbs) of flour.

  • Floydm's picture
    Floydm

    Tonight I baked white bread.

    White Bread

    Nothing artisan or fancy about this, just good, simple home cooking. The kind of bread you eat right out of the oven.

    I fudged the recipe. It was basically:

    3 cups all-purpose flour

    1 cup very warm milk

    2 tablespoons melter butter

    2 tablespoon honey

    2 teaspoons instant yeast

    1/2 teaspoon salt

    Mix in the standmixer for 10. Let rise covered for an hour, shape, place in a greased pan, cover, allow another hour to rise. Bake at 350 for roughly 45 minutes.

    White bread

    Quick, simple, easy, and absolutely perfect.

     

     

    kgreg's picture
    kgreg

    Many years ago I went to a place no longer open called "The Lincoln Del".  I use to buy a loaf of bread called Egg Bread.  It was not sweet, but very yellow in color and was great.  It seemed very moist and elastic.  Does anyone know what this may be or how I could get the recipe.  I have tried to make it at home, but the consistancy of the bread was not correct. 

    mountaindog's picture
    mountaindog

    Stayed home today to nurse my lame dog, so I have time to make some notes for myself for future reference:

    For this past weekend's baking, I decided to make the Thom Leonard Country French bread (Glezer) again, but using my rye starter, and compare it to the Essential Columbia (also Glezer) my current favorite recipe. For the Columbias, however, I made two different batches for further taste comparison: one with a wet rye starter (saving the step of making a firm starter if you don't keep one) and the other with the firm white starter called for in the original recipe in Glezer's book.

    Here is how the Thom Leonard bread came out:

    The crumb was beautiful as was the oven spring and crust. I also used King Arthur AP flour only, rather than a mix of AP and Bread, because the protein level of KA AP is as high as other bread flours (11.7%). The last time I made this bread using KA bread flour, the crumb was way too tough and chewy, even for me who likes chewy bread. Seems like the only reason to use a very high protein bread flour like KA (12.7%) would be to strenghten mostly whole grain breads. The Thom Leonard above tasted very nice for a mostly white French bread, however, I have developed a taste for a bit more whole wheat in my bread which is why I prefer the Columbia at the moment. Of course, the original Thom Leonard recipe calls for high extraction flour, not white AP flour. If I can ever get my hands on some, I will try it again with that.

    Next, I made the Columbia using a wet rye starter, and omitted the small amount of rye called for in the recipe, replacing it with additional whole wheat and white AP. To first make the levain for this recipe using the wetter rye starter rather than the stiff white starter called for, I used a bit more starter, a bit less water, and a bit more flour, until the correct consistency was achieved and the total weight of the levain as an overall ingredient in the recipe was preserved. This was a pretty slack dough, as I like to work with wetter doughs for improved crumb, so when I tried to slash it for the batard, the darn razor dragged again despite oiling and I went over the same slash too many times and compressed the dough too much in those spots, you can see the results in the crumb shot below:

    Despite the spread out loaf, I still got some nice holes and the crust was gorgeous! The taste was as great as before, with a slight flavor from the rye starter that made it taste mildly like a rye bread.

    The next batch of Columbias were made with the stiff white starter called for in the recipe, my stiff starter uses 75% white bread flour to 25% whole wheat flour. I fed it 3 times at 12 hr intervals before making the levain with it for this recipe. Rather than making 4 smaller loaves, I made 2 large ones using bannetons. I had trouble with slack dough sticking to bannetons before so I got over-eager with the flour on these, and I had to brush a lot of it off after baking. I also think it inhibited the crust forming nicely as in the free-form loaves above which have the nice crisp crackly bubbles. The other thing I did differently was to degas them by pressing the flat of my hand all over the dough before rounding into boules, thinking I would try to even out the crumb more, but I overdid it, and I did not get as nice holes this time - there are some big ones, but not as many as I like to have and not as even. Below are photos of the large boules made with the stiff starter, and for comparison I stacked the previous batch's smaller rye starter batard on top of the sliced boule - the pic on the right is without a flash and shows the holes in shadow a little better, while the left shows the actual color of the crumb nicely:

    I also found that I prefer making the smaller batards free-form for this recipe rather than using a banneton to make larger boules. Not only does this avoid getting excess flour on the crust, but it provides a greater surface area and ratio of crust to crumb, since the crust is so good on this bread. As far as taste difference in crumb between the wet rye starter method vs. the stiff white starter, it is very hard to tell the difference, but I like the stiff starter version's flavor slightly better - it has a bit more tang and wheaty flavor and slightly less rye flavor - the rye flavor in the rye starter batch may outcompete the wheat germ and malt flavors. I would probably get the same result using my wet white starter, so I will try that next.

    Lessons learned:

    1) levain: using a wet starter seems to work just as well in this recipe as using a stiff one - the type of flour used will make a bigger difference in flavor than the hydration does.

    2) first fermentation: do not de-gas the dough completely, just fold it 2 or 3 times for strength during fermentation 30 min. apart. I also retarded the dough overnight in the fridge after a 2 hour room temp. first fermentation.

    3) shaping and proofing: handle as little as possible without de-gassing as noted above, but do gently form smaller batards rather then large boules to get more crust ratio. Without pressing out the gas, do tighten the batard into a very tight cylinder as much as possible to create enough surface tension to avoid it spreading out too much or flattening when scoring.

    4) when slashing a slack dough like this, don't score over it again or it will flatten it out too much.

    5) avoid over-flouring bannetons as it ruins the crust and didn't really help with the sticking anyhow, maybe a spray oil is better - I'd like to know how people avoid banneton stickiness and resulting collapse with the coiled willow baskets.

    That's it for this week...

     

    Pages

    Subscribe to Recent Blog Entries